Maple samara flight is robust to morphological perturbation and united by a classic drag model.

Winged, autorotating seeds from the genus Acer, have been the subject of study for botanists and aerodynamicists for decades. Despite this attention and the relative simplicity of these winged seeds, there are still considerable gaps in our understanding of how samara dynamics are informed by morphological features. Additionally, questions remain regarding the robustness of their dynamics to morphological alterations such as mass change by moisture or area change by damage. We here challenge the conventional approach of using wing-loading correlations and instead demonstrate the superiority of a classical aerodynamic model. Using allometry, we determine why some species deviate from interspecific aerodynamic behavior. We alter samara mass and wing area and measure corresponding changes to descent velocity, rotation rate, and coning angle, thereby demonstrating their remarkable ability to autorotate despite significant morphological alteration. Samaras endure mass changes greater than 100% while maintaining descent velocity changes of less than 15%, and are thus robust to changes in mass by moisture or damage. Additionally, samaras withstand up to a 40% reduction in wing area before losing their ability to autorotate, with the largest wings more robust to ablation. Thus, samaras are also robust to wing damage in their environment, a fact children joyfully exploit.

Water striders are impervious to raindrop collision forces and submerged by collapsing craters.

Water striders are abundant in areas with high humidity and rainfall. Raindrops can weigh more than 40 times the adult water strider and some pelagic species spend their entire lives at sea, never contacting ground. Until now, researchers have not systematically investigated the survival of water striders when impacted by raindrops. In this experimental study, we use high-speed videography to film drop impacts on water striders. Drops force the insects subsurface upon direct contact. As the ensuing crater rebounds upward, the water strider is propelled airborne by a Worthington jet, herein called the first jet. We show the water strider's locomotive responses, low density, resistance to wetting when briefly submerged, and ability to regain a super-surface rest state, rendering it impervious to the initial impact. When pulled subsurface during a second crater formation caused by the collapsing first jet, water striders face the possibility of ejection above the surface or submersion below the surface, a fate determined by their position in the second crater. We identify a critical crater collapse acceleration threshold ∼ 5.7 gravities for the collapsing second crater which determines the ejection and submersion of passive water striders. Entrapment by submersion makes the water strider poised to penetrate the air-water interface from below, which appears impossible without the aid of a plastron and proper locomotive techniques. Our study is likely the first to consider second crater dynamics and our results translate to the submersion dynamics of other passively floating particles such as millimetric microplastics atop the world's oceans.

Fur flutter in fluid flow fends off foulers.

The fouling of submerged surfaces detrimentally alters stratum properties. Inorganic and organic foulers alike attach to and accumulate on surfaces when the complex interaction between numerous variables governing attachment and colonization is favourable. Unlike naturally evolved solutions, industrial methods of repellence carry adverse environmental impacts. Mammal fur demonstrates high resistance to fouling; however, our understanding of the intricacies of such performance remains limited. Here, we show that the passive trait of fur to dynamically respond to an external flow field dramatically improves its anti-fouling performance over that of fibres rigidly fixed at both ends. We have previously discovered a statistically significant correlation between a group of flow- and stratum-related properties, and the quantified anti-fouling performance of immobile filaments. In this work, we improve the correlation by considering an additional physical factor, the ability of hair to flex. Our work establishes a parametric framework for the design of passive anti-fouling filamentous structures and invites other disciplines to contribute to the investigation of the anti-fouling prowess of mammalian interfaces.

Engineered Human Tissue as A New Platform for Mosquito Bite-Site Biology Investigations.

Vector-borne diseases transmitted through the bites of hematophagous arthropods, such as mosquitoes, continue to be a significant threat to human health globally. Transmission of disease by biting arthropod vectors includes interactions between (1) saliva expectorated by a vector during blood meal acquisition from a human host, (2) the transmitted vector-borne pathogens, and (3) host cells present at the skin bite site. Currently, the investigation of bite-site biology is challenged by the lack of model 3D human skin tissues for in vitro analyses. To help fill this gap, we have used a tissue engineering approach to develop new stylized human dermal microvascular bed tissue approximates-complete with warm blood-built with 3D capillary alginate gel (Capgel) biomaterial scaffolds. These engineered tissues, termed a Biologic Interfacial Tissue-Engineered System (BITES), were cellularized with either human dermal fibroblasts (HDFs) or human umbilical vein endothelial cells (HUVECs). Both cell types formed tubular microvessel-like tissue structures of oriented cells (82% and 54% for HDFs and HUVECs, respectively) lining the unique Capgel parallel capillary microstructures. Female Aedes (Ae.) aegypti mosquitoes, a prototypic hematophagous biting vector arthropod, swarmed, bit, and probed blood-loaded HDF BITES microvessel bed tissues that were warmed (34-37 °C), acquiring blood meals in 151 ± 46 s on average, with some ingesting ≳4 µL or more of blood. Further, these tissue-engineered constructs could be cultured for at least three (3) days following blood meal acquisitions. Altogether, these studies serve as a powerful proof-of-concept demonstration of the innovative BITES platform and indicate its potential for the future investigation of arthropod bite-site cellular and molecular biology.

Graded Atmospheres of Volatile Pyrethroid Overlaid on Host Cues Can Be Established and Quantified Within a Novel Flight Chamber for Mosquito Behavior Studies.

Spatial repellents are emerging as a promising approach to reduce vector-disease burden; however, the evolution of genetically resistant mosquitoes decreases repellent efficacy. The development of flight chambers to investigate spatial repellent application techniques is vital for sustainable mosquito control. We present an air-dilution chamber as a novel bioassay to study mosquito flight behavior responses to chemical gradients of the volatile, pyrethroid transfluthrin (TF). Air dilution was used to simulate a larger environment of stable concentration gradients verified with carbon dioxide (CO2) which was homogenously delivered and measured across the chamber to achieve a 5× inlet/outlet [CO2] ratio with 0.17 m/s outlet velocity. Female Aedes (Ae.) aegypti (Diptera: Culicidae, Linnaeus, 1762) were exposed to volatilized TF paired with heat, CO2, and Biogents-Sweetscent host-cues. Tandem solvent extraction-gas chromatography-mass spectrometry (SE-GC-MS) was used to quantify air samples taken during TF emanations with a limit of detection (LOD) and quantification (LOQ) of 2 ± 1 and 5 ± 2 parts-per-trillion (ppt) TF, respectively. Homogenous air diluted emanation of the spatial repellent TF was at least twice that of the 5× CO2 gradient with the same air flow in the chamber. The airborne TF concentrations the mosquitoes were exposed to range from 1 to 170 ppt. Video recordings of mosquito behavior during host-cues exposure revealed increased inlet activity, while exposure to TF protected host resulted in decreased inlet activity over time with inlet-outlet mosquito positional variation. This novel flight chamber design can simulate 'long'-range exposure with simultaneous quantitation of airborne spatial repellent to understand dose-dependent effects on mosquito behavior.

Designing a Generic Videography Experiment for Studying Mosquito Behavior.

In this protocol, we describe the basic design considerations and general method to set up a videography system to study mosquito behavior. A basic videography system to study mosquito behavior requires one or more cameras with an optical lens, camera lighting, a calibration setup, and a system to record the video data or otherwise control the camera. Here, we define two types of systems: (1) a real-time videography-based tracking system for determining the position of multiple moving (flying) mosquitoes, and (2) a high-fidelity videography system that can track the detailed movements of body, wings, and legs of a single mosquito at high spatial and temporal resolutions. These high-fidelity trackers are divided into single-camera systems for studying two-dimensional (2D) movements, and multicamera systems that can reconstruct three-dimensional (3D) movements of the mosquito.

Using Videography to Study the Biomechanics and Behavior of Freely Moving Mosquitoes.

Female mosquitoes of most species require a blood meal for egg development. When biting a human host to collect this blood meal, they can spread dangerous diseases such as malaria, yellow fever, or dengue. Researchers use videography to study many aspects of mosquito behavior, including in-flight host-seeking, takeoff, and landing behaviors, as well as probing and blood feeding, and more. Here, we introduce protocols on how to use videography to capture and analyze mosquito movements at high spatial and temporal resolution, in two and three dimensions.

Tracking the Body, Wing, and Leg Kinematics of Moving Mosquitoes.

In this protocol, we discuss general techniques for tracking the three-dimensional (3D) locations of the mosquito body, wings, legs, or other features of interest using videos. Tracking data must be acquired to produce detailed kinematics of moving mosquitoes. The software of focus for this protocol, DLTdv, was chosen for its widespread use and excellent support and because it is open-source. In addition, DLTdv allows both manual and automatic tracking. The automatic tracking can be done using a classic machine vision or machine-learning algorithm. The software supports both single-camera analysis and multicamera systems and can take advantage of sophisticated calibration algorithms, both for intrinsic lens distortion correction and for 3D DLT-based reconstruction. For this protocol, we assume all kinematic data is acquired post hoc through video analysis.

Transforming Capillary Alginate Gel (Capgel) into New 3D-Printing Biomaterial Inks.

Three-dimensional (3D) printing has great potential for creating tissues and organs to meet shortfalls in transplant supply, and biomaterial inks are key components of many such approaches. There is a need for biomaterial inks that facilitate integration, infiltration, and vascularization of targeted 3D-printed structures. This study is therefore focused on creating new biomaterial inks from self-assembled capillary alginate gel (Capgel), which possesses a unique microstructure of uniform tubular channels with tunable diameters and densities. First, extrusions of Capgel through needles (0.1-0.8 mm inner diameter) were investigated. It was found that Capgel ink extrudes as slurries of fractured and entangled particles, each retaining capillary microstructures, and that extruded line widths W and particle sizes A were both functions of needle inner diameter D, specifically power-law relationships of W~D0.42 and A~D1.52, respectively. Next, various structures were successfully 3D-printed with Capgel ink, thus demonstrating that this biomaterial ink is stackable and self-supporting. To increase ink self-adherence, Capgel was coated with poly-L-lysine (PLL) to create a cationic "skin" prior to extrusion. It was hypothesized that, during extrusion of Capgel-PLL, the sheared particles fracture and thereby expose cryptic sites of negatively-charged biomaterial capable of forming new polyelectrolyte bonds with areas of the positively-charged PLL skin on neighboring entangled particles. This novel approach resulted in continuous, self-adherent extrusions that remained intact in solution. Human lung fibroblasts (HLFs) were then cultured on this ink to investigate biocompatibility. HLFs readily colonized Capgel-PLL ink and were strongly oriented by the capillary microstructures. This is the first description of successful 3D-printing with Capgel biomaterial ink as well as the first demonstration of the concept and formulation of a self-adherent Capgel-PLL biomaterial ink.

Fouling of mammalian hair fibres exposed to a titanium dioxide colloidal suspension.

Fouling of surfaces in prolonged contact with liquid often leads to detrimental alteration of material properties and performance. A wide range of factors which include mass transport, surface properties and surface interactions dictate whether foulants are able to adhere to a surface. Passive means of foulant rejection, such as the microscopic patterns, have been known to develop in nature. In this work, we investigate the anti-fouling behaviour of animal fur and its apparent passive resistance to fouling. We compare the fouling performance of several categories of natural and manufactured fibres, and present correlations between contamination susceptibility and physio-mechanical properties of the fibre and its environment. Lastly, we present a correlation between the fouling intensity of a fibre and the cumulative impact of multiple interacting factors declared in the form of a dimensionless group. Artificial and natural hair strands exhibit comparable anti-fouling behaviour in flow, however, the absence of flow improves the performance of some artificial fibres. Among the plethora of factors affecting the fouling of fur hair, the dimensionless groups we present herein provide the best demarcation between fibres of different origin.

Hydrodynamics and surface properties influence biofilm proliferation.

A biofilm is an interface-associated colloidal dispersion of bacterial cells and excreted polymers in which microorganisms find protection from their environment. Successful colonization of a surface by a bacterial community is typically a detriment to human health and property. Insight into the biofilm life-cycle provides clues on how their proliferation can be suppressed. In this review, we follow a cell through the cycle of attachment, growth, and departure from a colony. Among the abundance of factors that guide the three phases, we focus on hydrodynamics and stratum properties due to the synergistic effect such properties have on bacteria rejection and removal. Cell motion, whether facilitated by the environment via medium flow or self-actuated by use of an appendage, drastically improves the survivability of a bacterium. Once in the vicinity of a stratum, a single cell is exposed to near-surface interactions, such as van der Waals, electrostatic and specific interactions, similarly to any other colloidal particle. The success of the attachment and the potential for detachment is heavily influenced by surface properties such as material type and topography. The growth of the colony is similarly guided by mainstream flow and the convective transport throughout the biofilm. Beyond the growth phase, hydrodynamic traction forces on a biofilm can elicit strongly non-linear viscoelastic responses from the biofilm soft matter. As the colony exhausts the means of survival at a particular location, a set of trigger signals activates mechanisms of bacterial release, a life-cycle phase also facilitated by fluid flow. A review of biofilm-relevant hydrodynamics and startum properties provides insight into future research avenues.

Predictive modelling of drop ejection from damped, dampened wings by machine learning.

The high frequency, low amplitude wing motion that mosquitoes employ to dry their wings inspires the study of drop release from millimetric, forced cantilevers. Our mimicking system, a 10-mm polytetrafluoroethylene cantilever driven through ±1 mm base amplitude at 85 Hz, displaces drops via three principal ejection modes: normal-to-cantilever ejection, sliding and pinch-off. The selection of system variables such as cantilever stiffness, drop location, drop size and wetting properties modulates the appearance of a particular ejection mode. However, the large number of system features complicate the prediction of modal occurrence, and the transition between complete and partial liquid removal. In this study, we build two predictive models based on ensemble learning that predict the ejection mode, a classification problem, and minimum inertial force required to eject a drop from the cantilever, a regression problem. For ejection mode prediction, we achieve an accuracy of 85% using a bagging classifier. For inertial force prediction, the lowest root mean squared error achieved is 0.037 using an ensemble learning regression model. Results also show that ejection time and cantilever wetting properties are the dominant features for predicting both ejection mode and the minimum inertial force required to eject a drop.

Landing mosquitoes bounce when engaging a substrate.

In this experimental study we film the landings of Aedes aegypti mosquitoes to characterize landing behaviors and kinetics, limitations, and the passive physiological mechanics they employ to land on a vertical surface. A typical landing involves 1-2 bounces, reducing inbound momentum by more than half before the mosquito firmly attaches to a surface. Mosquitoes initially approach landing surfaces at 0.1-0.6 m/s, decelerating to zero velocity in approximately 5 ms at accelerations as high as 5.5 gravities. Unlike Dipteran relatives, mosquitoes do not visibly prepare for landing with leg adjustments or body pitching. Instead mosquitoes rely on damping by deforming two forelimbs and buckling of the proboscis, which also serves to distribute the impact force, lessening the potential of detection by a mammalian host. The rebound response of a landing mosquito is well-characterized by a passive mass-spring-damper model which permits the calculation of force across impact velocity. The landing force of the average mosquito in our study is approximately 40 [Formula: see text]N corresponding to an impact velocity of 0.24 m/s. The substrate contact velocity which produces a force perceptible to humans, 0.42 m/s, is above 85% of experimentally observed landing speeds.

Drop ejection from vibrating damped, dampened wings.

The task of moisture removal from small, delicate surfaces such as sensors and flight surfaces on micro-flyers can be challenging due to remote location and small scale. Robustness is enhanced when such surfaces, of comparable scale to deposited drops, can remove deposition without external influence. At this scale, the dynamics of a solid surface responding to a mechanical input is highly-coupled to the fluid resting above. In this study, we explore highly-coupled fluid-solid mechanics using singular liquid drops of water and a glycerin solution resting on millimetric, forced cantilevers. These wing-inspired cantilevers are sinusoidally displaced at their base across 85-115 Hz, producing surface accelerations up to 45 gravities at drop release. We observe three principal drop release modes: sliding, normal-to-cantilever ejection, and drop pinch-off. Release modes are dependent on drop and cantilever properties, and cantilever motion. Predictions of ejection modes are accomplished by application of Euler elastica theory and drop adhesion forces. Lastly, we determine damping of cantilever motion imposed by sloshing drops.

Impacts of Free-falling Spheres on a Deep Liquid Pool with Altered Fluid and Impactor Surface Conditions.

Vertical impacts of spheres on clean water have been the subject of numerous water entry investigations characterizing cavity formation, splash crown ascension and Worthington jet stability. Here, we establish experimental protocols for examining splash dynamics when smooth free-falling spheres of varying wettability, mass, and diameter impact the free surface of a deep liquid pool modified by thin penetrable fabrics and liquid surfactants. Water entry investigations provide accessible, easily assembled and executed experiments for studying complex fluid mechanics. We present herein a tunable protocol for characterizing splash height, flow separation metrics, and impactor kinematics, and representative results which might be acquired if reproducing our approach. The methods are applicable when characteristic splash dimensions remain below approximately 0.5 m. However, this protocol may be adapted for greater impactor release heights and impact velocities, which augurs well for translating results to naval and industry applications.

Organismal aggregations exhibit fluidic behaviors: a review.

Groups of organisms such as flocks, swarms, herds, and schools form for a variety of motivations linked to survival and proliferation. Their size, locomotive domain, population, and the environmental stimuli guiding motion make challenging the study of member interactions and global behaviors. In this review, we borrow principles and analogies from fluids to describe the characteristics of organismal aggregations, which may inspire new tools for the analysis of collective motion. Examples of fluid resemblance include open channel flow, droplet formation, and particle-laden flow. We show how the properties of density, viscosity, and surface tension have strong parallels in the structure and behavior of aggregations of contrasting scale and domain. In certain cases, aggregations are sufficiently fluid-like that values can be assigned to such properties. We highlight how organisms engaging in collective motion can flow, roll, and change phase. Finally, we present limitations and exceptions for the application of fluidic principles to the motion of living groups.

Mosquitoes modulate leg dynamics at takeoff to accommodate surface roughness.

Insects perform takeoffs from a nearly unquantifiable number of surface permutations and many use their legs to initiate upward movement prior to the onset of wingbeats, including the mosquito. In this study we examine the unprovoked pre-takeoff mechanics of Aedes aegypti mosquitoes from two surfaces of contrasting roughness, one with roughness similar to polished glass and the other comparable to the human forearm. Using high-speed videography, we find mosquitos exhibit two distinct leg actions prior to takeoff, the widely observed push and a previously undocumented leg-strike, where one of the rearmost legs is raised and strikes the ground. Across 106 takeoff sequences we observe a greater incidence of leg-strikes from the smoother surface, and rationalize this observation by comparing the characteristic size of surface features on the mosquito tarsi and each test surface. Measurements of pre-takeoff kinematics reveal both strategies remain under the mechanosensory detection threshold of mammalian hair and produce nearly identical vertical body velocities. Lastly, we develop a model that explicates the measured leg velocity of striking legs utilized by mosquitoes, 0.59 m s-1.

Void Entry by Aedes aegypti (Diptera: Culicidae) Mosquitoes Is Lower Than Would Be Expected by a Randomized Search.

Insects enter every passible space on the planet. Despite our best efforts, flying insects infiltrate slightly open windows in domiciles, automobiles, storage spaces, and more. Is this ubiquitous experience a consequence of insect abundance and probability, or are flying insects adept at detecting passageways? There remains a lack of understanding of insect effectiveness in finding passage through the voids and imperfections in physical barriers in response to attractants, a topic particularly critical to the area of insect-borne disease control. In this study, we recorded the passage of Aedes aegytpi mosquitoes through voids in vertically oriented bed net fabrics within a cylindrical flight arena. We model the probability mosquitoes will discover and navigate the void in response to a physical attractant by observing their search behavior and quantifying the region within a void that is physically navigable, constrained by body size. Void passage rates were lower than that would be expected by purely randomized search behaviors and decline rapidly as the void diameter approaches the in-flight width of the insect.

High-speed microjets issue from bursting oil gland reservoirs of citrus fruit.

The rupture of oil gland reservoirs housed near the outer surface of the citrus exocarp is a common experience to the discerning citrus consumer and bartenders the world over. These reservoirs often rupture outwardly in response to bending the peel, which compresses the soft material surrounding the reservoirs, the albedo, increasing fluid pressure in the reservoir. Ultimately, fluid pressure exceeds the failure strength of the outermost membrane, the flavedo. The ensuing high-velocity discharge of oil and exhaustive emptying of oil gland reservoirs creates a method for jetting small quantities of the aromatic oil. We compare this jetting behavior across five citrus hybrids through high-speed videography. The jetting oil undergoes an extreme acceleration to reach velocities in excess of 10 m/s. Through material characterization and finite element simulations, we rationalize the combination of tuned material properties and geometries enabling the internal reservoir pressures that produce explosive dispersal, finding the composite structure of the citrus peel is critical for microjet production.

Mosquitoes actively remove drops deposited by fog and dew.

We report mosquito behaviors for removing accumulated drops of water which would otherwise increase the energy expended during takeoff and free flight. These techniques take advantage of the insect's small size and great structural strength. To dry their wings before takeoff, mosquitoes employ a flutter stroke, at double the wingbeat frequency of normal flight, generating nearly 2500 gravities of acceleration. Mosquitoes may also remove drops by the respective accelerations associated with takeoff and collision with the ground. We correlate the accelerations and size of drops ejected using a simple model involving the drop's inertial force and surface tension. We note mosquitoes may use similar techniques to remove synthetic drops, making our observations applicable for understanding the resistance of insects to insecticides.